Don't stain the deck early in the summer
VICTORIA If you've stacked up a truckload of yard projects for the warm weather, there's one task that should be taken off your list, says Philip Caron of Sico Paints: staining outdoor wood surfaces, including your deck and fence.
"Many peoplepeople Panthers jerseys china don't realize that the spring or summer is not the best time to apply stain to wood surfaces like decks or fencing," says Caron. Wood resurfacing is a project best left to September.
Staining too early in the season might lead to blistering and peeling because wood pores are still saturated, leaving no avenues for the stain to penetrate the wood.
The summer heat offers its own challenges as well. Caron says that the dilutant in the stain can evaporate too quickly for the coating to effectively penetrate the wood.
This is one instance where slow and steady beats speed, as quick drying causes noticeable stroke marksmarks cheap Panthers jerseys free shipping to form.
Here are a few wood surfacing tips from the pros at Sico Paints:
n Surface preparation is key. Durability and shine of a staining project begins with proper surfacesurface official Panthers jersey preparation. Use spring and summer months to prepare wood surfaces for a September stain application.
To maintain wood surfaces, clean off loose fibres, mildew, dust or moss stains with an exterior wood restorer product. Rinse the surface with a pressurized clean water jet after 15 minutes and let the surface dry over two or three sunny days. Sand the surface to remove any residue and open the pores of the wood for a better staining job.
n Strip wood when needed. If your wood has been previously stained, painted or varnished, strip the surface with an exterior stain remover.
For best results, use gentle stripper products specially formulated for exterior wood surfaces that are deteriorating and peeling. After applying the remover, rinse well and let the surface dry for a couple of days. Complete preparations by sanding the surfaces with 80 grit sandpaper.
n Even new decks need sanding. To avoid future peeling, sand your new deck with 80 grit paper before staining. Vertical surfaces should also be sanded with 80 grit paper, but a second sanding using 120 grit paper provides a smoother finish.
To see if you've done a thorough enough job, let a few drops of water fall onto the surface. If the water beads on the deck, you have more sanding to do. If the water penetrates, you're ready to stain.
n Choose the right stain. Select a top quality stain to give your exterior wood richness andand womens Panthers jersey depth. There are highly durable products available, such as Sico's alkyd translucent exterior wood stain, which can be used on any wood surface, including decks, shutters, balconies and fences.
Made using a special alkyd resin formula, Sico's stain provides water resistance and protection against weather, UV rays, cracking, peeling and fading. Remember, transparent stains unlike semi transparent and translucent products do not filter UV rays, causing a wood's colour to eventually fade.
n Weather conditions and tools matter. Wood planks tend to become warped over time, so a paint brush not a roller Panthers new jerseys 2014 is the best tool to apply a stain. There are brushes available specifically designed for wood and deck staining. Before you begin your project, ensure the weather has been dry for two to three previous days and the temperature is at least 15 C, and not more than 25 C.
n Read the product label. If a paint company suggests two coats of stain, don't be misled into thinking that extra coats will provide better protection. A coat that is too thick compromises the flexibility of the stain, which enables the stain to adhere to the shape of the wood without cracking or peeling.
Strictly follow re coat times, which may require waiting times of anywhere from 15 minutes to 24 hours between coats. Only use stains recommended for the job at hand. While a marine varnish works well on a boat, it is too rigid and offers insufficient UV protection for a wooden deck or fence.
n Re stain regularly. To keep your exterior wood surfaces looking like new, re stain them every two to three years. Some surfaces may need more frequent staining, depending on their uses.
If, for example, you shovel your deck in the winter, expect marks on the surface once the snow melts. When re staining, remember to properly prepare surfaces. Staining over cracks and peels is a temporary solution.